ASP.NET, SQL Server, WPF, C#, VB.NET

If I want to install and setup a new Exchange 2003 server that will support 
 
6 - 10 people in the office on the 10/100 LAN and upwards of 40 people out 
 
in the field through OWA what would be my best bet? 
 
- Build a "monster server" and run Exchange & OWA on the same box? 
 
- Run OWA on it's own upper-mid performance box and Exchange on a standard 
 
grade server with big, fast drives? 
 
- How much memory puts OWA in "the sweet spot? 
 
- How much memory puts Exchange in "the sweet spot"? 
 
Thanks for the help.

I would like some advice. We have a Security Manager at our company who wants 
 
to separate all user desktops in our organisation from Exchange and Active 
 
Directory and all Microsoft services with a Checkpoint Firewall. 
 
We would need to configure the NG60 Checkpoint firewall with a ruleset that 
 
would allow the user desktop groups which are split into 8 Vlans to access 
 
all Exchange ports including the RPC range as well as the Active Directory 
 
services. 
 
My question is this do ma ...

CENTRAL ÚNICA DE VENDAS 
 
10 Marcas de ratreadores, Compare e Compre. 
 
Rastreador de Veículo 
 
Rastreadores de Veículos 
 
Rastreador GPS 
 
Rastreadores GPS 
 
Rastreador Ituran 
 
Rastreadores Ituran 
 
Rastreador Portátil 
 
Rastreadores Portáteis. 
 
Assistência 24 Horas 
 
Visite agora mesmo nosso site. 
 
http://tel011-50523122.vila.bol.com.br/ 
 
Graber - Teletrim - Tele Trim - Ituran - 
 
Rastreadores gps , Localizadores, Bloqueadores 
 
Graber - Teletrim - Tele Trim - Ituran - 
 
Ra ...

We have a single Exchange 2003 server hosting a small environment (100 
 
mailboxes).  We would like to install OWA on this server and also move it to 
 
our DMZ without configuring front-end and back-end servers.  Not sure if this 
 
configuration would work.  Any help would be greatly appricated. 
 
Thank you, 
 
Julie

Hello, 
 
I have to OWA front end servers using NLB. These 2 servers have 2 NIC 
 
each. 
 
On FE01 server the NLB NIC  =  10.217.216.16 
 
On FE01 server the NLB NIC  =  10.217.216.18 
 
The NBL IP is 10.217.216.17 
 
Our web mail address is webmail.dfahome.com 
 
No on IIS the sites on both server are set to all Unassigned and I want 
 
to change this to either the NBL IP  on bothe sites so that I can 
 
create more virtual groups but I can not access the 
 
webmmail.dfahome.com internally. It ...

Hi Everyone, 
 
My company is planning for an NT to AD migration that includes an Exchange 
 
5.5 to Exchange 2003 migration. 
 
At this point we are not sure if we will be performing an in place upgrade 
 
of the domain or migrating to a new AD domain.  If we do the migration to a 
 
new AD domain, can the new Exchange 2003 server (in the new AD domain) be a 
 
part of the existing Exchange 5.5 site?  In the end we want to be able to 
 
move the mailboxes from one server to the other.  Is there ...

I havent firewall that running our server!because I only use for test but We 
 
have a problem SO we cant enable that it is not run properly 
 
Please explain What I should do? 
 
for instance 
 
directnic my account A record *.mydomain.com destination mystatic 
 
ip(85.105.100.x) Mx record mail.mydomain.com destination mystatic 
 
ip(85.105.100.x) 
 
now my server network info 
 
ip:192.168.1.100 
 
netmask:255.255.255.0 
 
gtway:192.168.1.1 
 
preferend dns 127.0.0.1 
 
alternate:192.168.1.100 ...

Hi, 
 
What is the best scenario for inbound and outbound emails: Using front-end 
 
servers or Basic servers? I use at the moment two with two different costs 
 
and it works fine now I would like to know if someone has a better practice... 
 
Thanks

hi everbody 
 
I have exch2003 running on win2k3 ent.. 
 
when I have opened the system this morning! 
 
I have a following problems 
 
1:exchange pop3 service doesn't run and I couldn't in the service manager 
 
2:exchange virtual directory(modify action)disabled(rihgt click)doesn't 
 
select action 
 
what kind couldnt problems? 
 
BEST REGARDS 
 
-- 
 
MCSE+S+M MCDBA

hi everbody 
 
I have etiher win2k3 ent. or ex2003 ent. 
 
when I have opened the system this morning! 
 
1:exchange pop3 service doesnt run and I couldnt in the service manager 
 
2:exchange virtual directory(modify action)disabled(rihgt click)doesnt 
 
select action 
 
what kind couldnt problems? 
 
have a nice day 
 
best regards! 
 
-- 
 
MCSE+S+M MCDBA 
 
-- 
 
MCSE+S+M MCDBA

hi all, 
 
we are divesting one department and once the sell off is complet we'll be 
 
hosting a number of services on their behalf.  not being familiar with 
 
exchange i am wondering how i can best host their mail on our exchange 
 
server.  my preference would be to have no trust relationship between our AD 
 
Domain and their newly setup domain.  is this easiy acheived? 
 
my thinking here is that we can setup a site to site VPN connection have 
 
their mail routed via this connection to th ...

hi all, 
 
we are divesting one department and once the sell off is complete we'll be 
 
hosting a number of services for them.  what i would like to know is, is 
 
there a way we can host their mail on our exchange server without the need to 
 
have a trust relationship between our domain and their newly setup domain? 
 
perhaps we could setup a site to site VPN connection and route their e-mail 
 
via this connection, is this a possibility? and if so, how do we do this on 
 
exchange (i'm not  ...

I'm migrating to Exchange 2003 SP2 from Lotus Notes 6* with around 
 
25000+ users into around 45 Sites within a 5 Domain Forest 
 
I need to know roughly how many mailboxes to place on each Exchange 
 
Server. The average Notes DB size is 5GB 
 
Are there any size restrictions as we have a few users with 20GB 
 
Databases

I have two companies that have merged.  Both are running Exchange 5.5 and 
 
both need to upgrade to Exchange 2003.  Both companies will be under one 
 
Active Directory forest.  What is the best way to bring both Exchange 
 
organizations into one? 
 
Thank you. 
 
Jim

Hi, 
 
Has anyone had to move the TEMP and TMP path to optimize the Exchange servers? 
 
I have just ran the new tool Exchange Troubleshooter and i am wondering if 
 
it is going to have a real impact on ours. 
 
Many thanks 
 
Ebk

Hello, 
 
The Exchange documentation keeps mentioning Round Robin DNS for Edge 
 
Transport Server redundancy? How about NLB? Is it possible ? 
 
I see that would need 3 NIC's, one for the NLB, one for External mail 
 
traffic and one for internal mail traffic. 
 
Would we be able to use NLB on both the external en internal NIC or just 
 
like with Exchange 2000/2003 just on the external NIC so that the internal 
 
mail servers see to edge servers? 
 
Thx in advance!

Hello, 
 
* Can anyone guide me to a good explanation about the mail flow between an 
 
external client using OWA in a deployment involving an Edge Transport 
 
Server? This seems to be missing for the moment in the documentation. 
 
* If one has a e-mail gateway in front of an Edge Transport Server how can 
 
one still make use of all the anti spam / anti virus tools on the Edge 
 
Server as many of the functionality is based on IP address? 
 
Thx!

Will CDOEXM be supported with Exchange 2007? 
 
Check out the following link before answering. 
 
<http://msdn.microsoft.com/library/en-us/ExSDKSolutions/html/c3719631-8529-4b55-9f56-50844d754396.asp>

I have a few questions on Exchange 2007 
 
1) If you have only 1 Exchange server where would you configure Sender ID? 
 
2) Where can I find out more on delegation from what I see the built in 
 
delegation is super simple and does not give the flexibility needed in 
 
coroprate environments. 
 
3) What antivirus programs currently work on Exchange 2007? 
 
4) What ports should I open on the internal firewall to support edgesync? 
 
5) With Beta 2 Outlook anywhere is disabled on a single exchang ...

Where is the Exchange 2007 Forum? <eom>

I am considering replacing one of my existing mail servers with an Exchange 
 
Server.  Both mail servers are currently in my DMZ, and I am little 
 
apprehensive about using a Microsoft product as a front line mail server.  I 
 
already have a Windows 2003R2SP1/XPSP2 native Active Directory Domain 
 
deployed on my LAN.  The LAN domain is a *.local domain and the mail server 
 
will deploy multiple *.com domains.  The DNS servers for the *.com domains 
 
are non-MS machines deployed on the DMZ. ...

I want to do the following: 
 
we have  a FE server y a Mailbox server and we want to publish OWA in the 
 
Internet. The users in the intranet access owa with FBA, we want that users 
 
from  the Internet accessing the owa have a custumize form that show a 
 
virtual keyboard to introduce her/his password. For use ISA Server with FBA, 
 
the front end server has to disable  Forms based Authentication. Do i need 
 
another frond end Server to do this. (One for internal user and another to 
 
ext ...

We have planned to increase the mailbox size from 100 MB to 1 GB for 50 % of 
 
the users in our domain . how to calculate the average disk size required and 
 
what steps has to be take to complete this task .

Does anyone have this teething issue with growing mailbox size and old email 
 
that require centralize archive, not pst.  Please enlighten

Hello, 
 
We have a split brain DNS configuration in which the domain name for the 
 
public en internal DNS name resolution are the same. 
 
PUBLIC DNS: mycompany.com 
 
with servers like www.mycompany.com, mail.mycompany.com 
 
INTERNAL DNS: mycompany.com (AD integrated) 
 
with servers like dc1.mycompany.com, dc2.mycompany.com, sql1.mycompany.com, 
 
exch1.mycomany.com, exch2.mycompany.com 
 
To install the Edge transport server role on a server you need to configure 
 
a DNS suffix. Wich one ...