ASP.NET, SQL Server, WPF, C#, VB.NET

I have multiple FTP sites on standalone Win2000 Server and IIS5.0 that are 
 
configured using the IIS Properties sheet, Directory Security tab, TCP/IP 
 
Access Restrictions to deny access to all IP except those listed. This 
 
configuration logic is hardcoded into my FTP app that passes data between 
 
sites. 
 
Now I am finally able to move our systems to WinXP and IIS5.1 but I cannot 
 
find a similar tab or configuration arrangement. Am I missing something here 
 
or am I really unable to d ...

OK I'm sure this has been posted before so excuse me if I ask again. I'm 
 
having problems uploading to my FTP server. I have no problems logging in 
 
and downloading a file but when I try to upload I get the error message 
 
below. Any help and advice greatly appreciated. 
 
An error occurred coping a file to the FTP Server. Make sure you have 
 
permission to put files on the server. 
 
Details: 
 
200    Type set to I. 
 
227      Entering Passive Mode (67,100,73,186,119,227). 
 
550      Access is denied

Hi everyone 
 
I having a little problem setting up a ftp in Windows 2003 Standar, I 
 
create a ftp normal and it's working but only with annonymus users but.. 
 
The users of Active Directory need be able to enter to the ftp site 
 
using theirs accunts, I can't accomplish this task . What I do it's the 
 
follow create local account and this work find the ftp can validate the 
 
user but there it's no way that the users of the AD can use their accounts. 
 
I will appreciate your help.. 
 
Thanks 
 
Beto

Hi all 
 
i am having more problems with the setup of ftp site in IIS 6.0 with 
 
isolate users. And i have some doubts. 
 
First, i don't work with the default site ftp. I stop the default site 
 
and create new ftp site. Then, configure this site. I create the folder 
 
of user, and i give permissions to the user about this folder.The 
 
directory of the user is created with this path 
 
\ftproot\LocalUser\{username} 
 
The fpt site with isolate mode has now the correctly folder path, the 
 
u ...

I am getting an Data Socket Error: Connection refused, when trying to coonect 
 
to my FTP site, what could be causing this,

Hi All, 
 
I've been adding Virtual Directories to my ftp server so that I can ftp 
 
content to and from the http server. So, for example, I've added the 
 
virtual ftp directory "Representations" pointing to 
 
"C:\Inetpub\wwwroot\Representations". But I seem unable to remove 
 
anonymous ftp access from this virtual directory. If I try to restrict 
 
access so that the anonymous guest cannot read the files or the 
 
directory lists then the http access gets rejected with a security 
 
error t ...

We've got a high-visibility problem integrating an application into our 
 
enterprise.  We've got a Windows Server 2003 SP1 IIS-FTP server set up 
 
with a few virtual directories that point to remote server shares. 
 
Doing PUTs to these directories works as fast as expected (~600kb/s). 
 
Doing GETs from these directories is amazingly slow (~16kb/s). 
 
This behavior can so far only be replicated by a remote mainframe as 
 
the client doing the GET.  Internal servers and workstations (Windows) ...

I am a novice user who would enjoy having FTP server to share my files 
 
to my friends/relatives across country. i already set up my ftp by 
 
following the instructions on this site 
 
http://mvps.org/marksxp/WindowsXP/IIS/iis1.php. now my problem is how 
 
will i test my ftp site if it is working? and what will be ftp address 
 
will i give to my friends to access my files 
 
-- 
 
dike 
 
------------------------------------------------------------------------ 
 
Posted via http://www.webser ...

I am trying to setup an FTP server on a Windows 2000 server.  I can only 
 
login in as anonymous.  If I set the login and password to be required, only 
 
the Administrators can login.  How do I fix it so you are required to login 
 
in?  Also, I would prefer to have the files to be put in a folder on another 
 
computer, preferrably a mac, is this possible.  I am presently running into 
 
login issues with this also. 
 
Thanks 
 
Mark

Highest rate for all type / brand 
 
24-Hrs +91 9810577227 Puri

I am having trouble with FTP in IIS 6 on server 2003 standard edition. 
 
Here is what is happening: 
 
I can setup users with virtual ftp directories, people can upload and 
 
download smaller files. But anytime I have a file that is over around 8 
 
or 10 megs the file doesnt complete the upload when using a program 
 
such as SmartFTP, WS_FTP, or CuteFTP. Essentially the upload gets stuck 
 
at 99%, all the bytes have transferred, but if you dont cancel the 
 
upload when it is stuck at 99% i ...

Hello, 
 
I have an IP leak problem running IIS 6.0 on W2K3 SP1.  I have followed 
 
recomendations in KB218180 and configured SetHostName so that my websites do 
 
not return internal IP addresses. 
 
But, my server still returns a private IP in the response to the following 
 
request: 
 
HEAD / HTTP/1.0 
 
I can't find any other solutions beyond the above.  Does anyone have any 
 
suggestions?

I have IIS6 FTP UserIsolationMode 
 
1) create LocalUser\User0 folder 
 
2) create user 'User0' 
 
3) setup NTFS permission to access by FTP for given user 
 
4) use ftp service... 
 
5) delete User0 
 
6) recreate User0 
 
7) grant NTFS permission again 
 
8) try to logon to FTP account and CANNOT TO GET ACCESS. WHY? 
 
but after some time I can again work with FTP

I have an IIS 6 FTP site. I have A LOT of virtual directories set up, 
 
one for each web site I'm administering. I want user1 to access Site1 
 
and Site2, but not Site3. I want user2 to be able to access Site2 and 
 
Site3, but not Site1. 
 
I've added user1 and user2 as users and added them to an FTPAccounts 
 
group. They are not a part of any other group and no other settings 
 
have been set on these accounts. 
 
In my Default FTP Site Properties, I checked Read access, but not 
 
write. M ...

Hi , 
 
I've been using Dreamweaver 4 for years now and use it to upload files to my 
 
website, very basic. 
 
Today I've encountered the 550 permission denied problem, I can't figure out 
 
what's the cause. 
 
I was uploading yesterday, no problems but today another story. 
 
I can connect to the web site but I can't upload or delete any files. 
 
I tried the WS FTP client today and the same problem . 
 
I've contacted my provider but it seems there's no problems on there side 
 
Any suggestions? 
 
Thanks 
 
D.

Am I missing something or is SSL not part of FTP within IIS6 (Win 2003 
 
server)? 
 
Also, I heard SSL is possible over FTP when IIS7 is released.  Is this true 
 
for I have not been able to find anything on MS's site.

Windows 2000 (IIS 5.0) and Windows XP.  I am setting up my default ftp site 
 
on two machines.  One running Win2k the other WinXP.  We have an established 
 
folder structure where our base ftp folder (ftpbase for discussion sake) has 
 
sub-folders for each department.  One of the folders happens to be named 
 
"Default".  This seems to cause a problem for the ftp service.  When I ftp 
 
as an anomymous user to the machines, I get put into the "Default" folder 
 
instead of ftpbase.  Is this b ...

We use iis 6.0 (on Windows 2003 Server) for ftp. We have placed some .tif 
 
files on our site and when users attempt to OPEN the files, they get an 
 
error message "Unable to open file 'c:\documents and 
 
settings...\2E-1[1].tif'. Check file name and permissions". 
 
The users are using IE 6 to access the ftp site. If they "copy to folder" 
 
instead of OPEN the file, then they are able to open the file locally. Other 
 
file types do not exhibit this behavior. Anyone have any ideas? 
 
Thanks.

Hi there, 
 
Dont know how to explain this but will try my best. 
 
I have computer running iis 6 on win 2003 server.This pc have 3 hdd that i 
 
use to share files.I setup ftp in iis and everything works fine.The only 
 
problem i have is following: 
 
I have 3 hdd partitions name1 name2 name3.When user loggs in to 
 
ftp://mysite.com they only see files in name1 hdd.This is because i have set 
 
home directory to name1 hdd.What i would like is user to see name1,name2 and 
 
name3 when they are ...

Hi, 
 
Is there any way to sort the list of files in CFtpFileFind? I want to 
 
retrieve the files in descending order of the modification/creation date. 
 
Also, is there anyway to get just the name of the clip in the directory on 
 
FTP server without using CFtpFileFind with _T("*.*") parameter and iterating 
 
through the list? 
 
It takes too much time if the directory has many files. 
 
Thanks, 
 
Bibo mushi.

Hi 
 
I regularly use ftp to transfer file to an ftp server at work 
 
I recently loaded coreftp (because my webspace needs an ftp client with the 
 
extra security features of coreftp ) and unfortunately made it my default 
 
ftp client 
 
This has totally stuffed up the ftp address bar access to other ftp sites 
 
I can't seem to undo this tragedy and I don't want to unload coreftp because 
 
I need it for my own webspace. 
 
Is there a way to return the default ftp client to ie? 
 
any help appreciated 
 
John Davy

I'm getting this when trying to open an ftp session with a w2k3 server. 
 
The ftp server was set to refuse connections to other than a specific 
 
(NATed) IP address (server is in a dmz), but I've switched to 'allow all' . 
 
This is also using the admin account/pswd for the server. 
 
Why would it persist in a 530 error when I'm switched to 'allow all'?

Using local accounts, how do I assign each individual account to different 
 
home directories based from one common root.  We do not want to use active 
 
directory to assign these home directories to the user. 
 
For example, 
 
FTPHomeDirectory 
 
FTPHomeDirectory\Human Resources (tied to local account, HRUser) 
 
FTPHomeDirectory\Sales (tied to local account, SalesUser) 
 
How do we accomplish this?